Material Handling Conveyors

Gravity Roller Conveyor – Steel Frame – 24 Wide on 1.5 centers

materialhandlingconveyors.net — Sat, 19 Jun 2010 13:37:37 +0000

This light duty gravity roller conveyor comes in standard 10' long sections. Now select from a wide assortment of different widths. A great product for those seeking a good conveyor solution. Choose from a heavier duty industrial grade steel frame or a lighter weight aluminum conveyor frame, both of which can be used for a wide assortment of conveying tasks. - - The point where the conveyor pieces connect and on both open ends is where the stands will be placed. If you plan on using conveyor curves the same rules apply, but they must also have a support in the middle of the curve. - - Stands work as follows: - Ea. 10' piece of conveyor needs 2 conveyor stands - Two 10' pieces of conveyor needs 3 conveyor stands - Three 10' pieces of conveyor needs 4 conveyor stands - etc, etc. - - Weight Capacities: - Steel Frame: 10' section Maximum Uniformly Distributed Load = 350 pounds -

Bulk Material Handling by Conveyor Belt IV (Bulk Material Handing By Conveyor Belt Proceedings, 4) (v. 4)

materialhandlingconveyors.net — Sat, 12 Jun 2010 16:07:41 +0000

NEW GRAVITY ROLLER CONVEYOR Expandable Table Flexible Case Box Seal Sealer boxes Wheel

materialhandlingconveyors.net — Sat, 12 Jun 2010 15:50:26 +0000


NEW GRAVITY ROLLER CONVEYOR. FEATURES: Adjustable Height. Each pair of legs extends to desired height. * Adjustable Length. * Four Pair of Heavy-Duty Casters with Brakes. * Easily Twist and Extend. * Stainless Steel Rolls.

Flexible Skatewheel Conveyor – 14W – 39 to 154L – 4Legs/Unit – Steel Rollers

materialhandlingconveyors.net — Sun, 06 Jun 2010 20:16:11 +0000

226 pounds/ft : 14" Wide Flexible Skatewheel Conveyor works well for loading and unloading trucks or trailers. Simply expand the conveyor into the truck and contract it when done. - - Capacity with 5-1/4" Axle Centers - Fully Extended - 175 pounds/lineal foot - - Skate Wheels (see pic3) - 6 Wheels per axle. - Black Polymer with 7 steel ball bearings in a captive race. - Red Nylon with nylon bushing. - Steel Skate with steel ball bearings - - Axles - 5/16" diameter steel axles - - Axle Centers - Standard 5-1/4" axle centers. To accommodate small packages, restrictors are also available for 3" or 4" centers. (Please call us for more information.) - - Leg sets and 2-Point Connection - 1-1/8" OD (Outside Diameter), 12-gauge steel tubing with adjustable inner leg and single cross-brace, zinc plated. Two-point bolted leg connection to skate wheel axles and side links. - - Height

Heavy Duty Flexible Skatewheel Conveyor – 24W – 145 to 502L – 12Legs/Unit – Poly Rollers

materialhandlingconveyors.net — Wed, 02 Jun 2010 23:08:39 +0000

275 pounds/ft : 24" Wide Heavy Duty Flexible Skatewheel Conveyor works well for loading and unloading trucks or trailers. Simply expand the conveyor into the truck and contract it when done. - - Capacity with 5-1/4" Axle Centers - Fully Extended - 275 pounds/lineal foot - - Skate Wheels (see pic4) - 9 Wheels per Axle - Black Polymer with 7 steel ball bearings in a captive race. - Red Nylon with nylon bushing. - Steel Skate with steel ball bearings - - Axles - 5/16" diameter steel axles - - Axle Centers - Standard 5-1/4" axle centers. To accommodate small packages, restrictors are also available for 3" or 4" centers. (Please call us for more information.) - - Leg sets and 2-Point Connection - 1-1/8" OD (Outside Diameter), 12-gauge steel tubing with adjustable reinforced inner leg and double cross-braces, zinc plated. Incremental height marks are provided on outer leg to

Heavy Duty Flexible Skatewheel Conveyor – 24W – 145 to 502L – 12Legs/Unit – Steel Rollers

materialhandlingconveyors.net — Mon, 31 May 2010 16:42:34 +0000

Pallet Handling Conveyors (YA-2393)

materialhandlingconveyors.net — Sun, 30 May 2010 15:07:53 +0000

H-STANDS AND KNEE BRACES AVAILABLE UPON REQUEST; Designed for multiple applications such as staging fully loaded pallets in shipping departments and assembly areas or as infeed or discharge ends of weight scales and stretch wrap machines. Moving fully loaded pallets is easy when you use these large conveyors. 2" dia., 49-1/2" 12-ga. spring-loaded rollers run on 3" centers and are set low on 7/16" hex axles. 52"W overall, 50" wide between rails. All-welded, 3-1/2" x 1", 1" thick 10-ga. channel steel frame with butt couplers. 300-lb. capacity per roller, 3,500-lb. fully supported frame capacity on the floor. If H-stands are needed, 5' centers are mandatory, call for information. Ships knocked down. FOB ILLINOIS.

Standard Handbook of Chains: Chains for Power Transmission and Material Handling, Second Edition

materialhandlingconveyors.net — Sat, 29 May 2010 23:28:38 +0000

Since its founding, the American Chain Association (ACA) has set the standard of excellence in developing the chain industry and enhancing the benefit to customers. The first edition of Chains for Power Transmission and Material Handling served as the keystone reference to the field for more than twenty years. Fully updated with the latest developments, the Standard Handbook of Chains: Chains for Power Transmission and Material Handling, Second Edition continues to build upon the more than 100 years of research and practical experience developed by the ACA.This hands-on reference provides up-to-date guidance on the selection, design, utilization, and maintenance of various types of chains. It authoritatively covers the use of chains in various application environments, terminology, safety procedures, and the history of chains. The book features consistent selection guidelines to ensure a proper choice of chain every time. Updates include new information on chain design considerations, power ratings for roller and silent chains, and selecting drives with a life other than 15,000 hours. This edition includes an entirely new chapter on flat-top chain conveyors.Including many helpful illustrations and a comprehensive troubleshooting table, the Standard Handbook of Chains: Chains for Power Transmission and Material Handling, Second Edition is the definitive handbook for anyone involved in the design, selection, use, and maintenance of all types of chains.

Flexible Skatewheel Conveyor – 18W – 85 to 343L – 8Legs/Unit – Nylon Rollers

materialhandlingconveyors.net — Fri, 28 May 2010 14:58:00 +0000

226 pounds/ft : 18" Wide Flexible Skatewheel Conveyor works well for loading and unloading trucks or trailers. Simply expand the conveyor into the truck and contract it when done. - - Capacity with 5-1/4" Axle Centers - Fully Extended - 175 pounds/lineal foot - - Skate Wheels (see pic3) - 6 wheels per axle - Black Polymer with 7 steel ball bearings in a captive race. - Red Nylon with nylon bushing. - Steel Skate with steel ball bearings - - Axles - 5/16" diameter steel axles - - Axle Centers - Standard 5-1/4" axle centers. To accommodate small packages, restrictors are also available for 3" or 4" centers. (Please call us for more information.) - - Leg sets and 2-Point Connection - 1-1/8" OD (Outside Diameter), 12-gauge steel tubing with adjustable inner leg and single cross-brace, zinc plated. Two-point bolted leg connection to skate wheel axles and side links. - - Height

Gravity Skatewheel Conveyor – Steel Frame – 12 Wide

materialhandlingconveyors.net — Fri, 28 May 2010 08:56:13 +0000

Light Duty Gravity Skatewheel Roller Conveyor comes in standard 10' long sections. Now select from a wide assortment of different widths. Comes in both galvanized steel or aluminum models. Ideal for transporting lightweight packaging. A heavy duty industrial grade steel conveyor that can be used for a wide assortment of conveying tasks. - - The point where the conveyor pieces connect and on both open ends is where the stands will be placed. If you plan on using conveyor curves the same rules apply, only when connecting with other pieces, they must also have a support in the middle. - - Stands work as follows: - Ea. 10' piece of conveyor needs 2 conveyor stands - Two 10' pieces of conveyor needs 3 conveyor stands - Three 10' pieces of conveyor needs 4 conveyor stands - etc, etc. - - Features Include: - Choice of galvanized steel or light weight aluminum models. - Made utilizing